Remove any screws that are holding the cover plates in place on either side of the door using a flat head screwdriver.
How to take a door handle off a closed door.
Unscrew your door knob begin by holding the door knob securely in place.
The door handle will now slide off.
Take out the screws then carefully pry off the plate with a flat head screwdriver.
You might have to pry the door a bit with a pry bar to get enough space to make it work.
Remove the screws holding the escutcheon plate to the door if they are exposed or look along the outer edge of the escutcheon plate for a small slit.
Find the screws on the side of the door that secure the latch plate.
Slide the cosmetic faceplate away from the door.
Straighten a paper clip and insert it into the hole.
Step by step how to remove the rear door handle on a 2018 honda accord.
If that doesn t work then just take a large pair of plumbing pliers vice grips or a pipe wrench and just.
Remove the latch mechanism if you re installing a new handle.
Apply a bit of pressure to the paper clip to trigger a release button inside the hardware.
Step 4 remove the hardware.
Insert the edge of your screwdriver under the plates and pry them up gently until they pop off then remove them and set them aside.
With the plate removed you can now pull the latch mechanism through the side of the door.
If any screws are exposed during this process remove them to release the lock and remove it from the door.
Simulating opening the door without the latch extending into and retracting out of the strike plate.
Unscrew and pull off the door handle s cover plates.
T 30 torque bit https amzn to 2sc805x affiliate links some links in this description may be affiliate links.
Now that the door sash is freed from the door frame and the mechanism has been made accessible it s become possible to remove the cylinder the handles and plates and finally the mechanism to replace the broken one.
Once the door is open try to actuate the door latch with the handle.
If your knob has a pinhole or small slot opening use a flathead screwdriver to push it inward.
Pull the knob off the spindle.
Depending on the door handle design the faceplate may be able to slide completely off.
Once triggered the lever or lock trim can be removed from the door.
If the door does not open.